National Item Identification Number
14-369-3518
143693518
5306-14-369-3518
5306143693518
National Stock Number
Item Name
AXE,FILETE,A TETE
Federal Supply Class
5306
Description
(All Except USA) A connecting and/or articulating device having a cylindrical shank with a head at one end and a threaded portion at the other end. The unthreaded portion is of a specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (25 microns) or less, of a specific diameter for items one inch (25.4 mm) or less in diameter. Items over one inch (25.4 mm) in diameter, shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (38 microns) or less. The specific RMS nicroinch finish on the bearing surface must not exceed 32 microinches (0.8 micron). The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (25 microns) below the minimum shank diameter. The head is designed to accommodate an external wrench or driver and/or may have flats or similar features for positioning or securing. The item may be internally relieved with a concentric hole along the longitudinal centerline which may extend a part or whole of its length. Excludes BOLT, CLOSE TOLERANCE; BOLT, SHEAR; BOLT, SHOULDER; and BOLT, INTERNALLY RELIEVED BODY.
Commercial and Government Entity Code (Supplier Data)
N1070
OLSEN FRED FLY OG LUFTMATERIELL A/S
PRINSENS G 2
1159 SENTRUM
OSLO
0152
NORWAY
22341388
F6117
F0111
F6117
F6117
Reference Numbers (Part Numbers)
39441-50X13BCM
39441-50X14BCM
39441-5013-5BCM
39441-5013-5BCM
39441BC050014M
Required Categories
Required Description